HYDRAULIC APRON DRIVE SYSTEM (1560, 1570 AND 1580 SPREADER)

Hydraulic Hose for New Holland CASE IH GRINDER-MIXER / SP480 / ST250 — 196584C2

CLAMP

BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd

LOCK WASHER 8mm ID

NUT M8, Cl 8

Lock Nut M8 x 1.25, Cl 8.8 for New Holland B100BLR / B100BTC / B110B — 832-10408

HYD CONNECTOR 3/4'' - 16 Male JIC x 7/8'' - 14 Male ORB

O-RING 0.097'' Thk x 0.755'' ID, -910, Cl 6, 90 Duro

Valve — New Holland — 1279338C1

UNION 3/4''-16, 37 Degree x 3/4''-16, 37 Degree

Hydraulic Hose 12.70 mm ID x 5080.00 mm, SAE 100R1 for New Holland P2080 / P2082 — 91241C1

HYDRAULIC HOSE 12.70 mm ID x 6730.00 mm, SAE 100R1

Hose for New Holland ST250 — 1978106C1

Mounting Clip 7/8'', Insulated, 1/2'' Bolt — fits 65 models across the New Holland lineup — H434289

BOLT Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd

LOCK WASHER 8mm ID

NUT M8, Cl 8

90 ELBOW 90 Degree Elbow, 7/8'' - 14 Male JIC x 7/8'' - 14 Male ORB

O-RING 0.097'' Thk x 0.755'' ID, -910, Cl 6, 90 Duro

REDUCER 37 Degree, 7/8''-14, Fem x 3/4''-16 Male

MOTOR HOUSING

FLANGE

BOLT Hex, M10 x 1.5 x 25mm, Cl 8.8

BOLT Hex, 3/8'' - 16 x 1'', Gr 5

COUPLING

Key 1/4'' Sq x 1'', Par for New Holland 1740 / 2340 / CASE IH GRINDER-MIXER / INTERNATIONAL HARVESTER GRINDER-MIXER / SC180 / SC230 / SC260 / SP580 — Q53

STOP

BOLT Hex, M6 x 1 x 35mm, Cl 8.8

LOCK WASHER M6

NUT M6, Cl 8

REDUCER 37 Degree, 7/8''-14, Fem x 3/4''-16 Male

FITTING

O-RING 0.097'' Thk x 0.755'' ID, -910, Cl 6, 90 Duro

HYD CONNECTOR 3/4'' - 16 Male JIC x 7/8'' - 14 Male ORB

O-RING 0.097'' Thk x 0.755'' ID, -910, Cl 6, 90 Duro

LOCK WASHER M10

WASHER 5/16''